MML-USA DOORS & WINDOWS
MML-USA fire rated marine doors are manufactured in our Hood River, OR door factory. Doors can be provided in a variety of fire classes including C class, B15, A15, A60 and H60. All doors have been tested to the IMO FTP 754(18) and can also meet the requirement of 46CFR and NVIC 9-97 construction.

Hardware is provided by major U.S. and European suppliers. This includes card lock and keying systems, padlocks, key cabinets, exit signs, general signage and labeling. A-60 Windows are available up to 1200 x 900mm.

Note: Doors of various US and European configurations, fire ratings, and finishes are a part of our QUICK SHIP PROGRAM. Please phone or fax for details of stock on hand. A-class doors to specification.

Click here for more information about MML USA

NORAC MARINE PRODUCTS
Maritime Services is pleased to be a distributor Norac Marine Interior Systems. Norac offers a complete interior soft core paneling system for use on board ships, cruise vessels, drilling rigs, offshore installations as well as onshore hotels, hospitals and industrial plants.

The system combines noncombustible and sound-absorbent elements and has been designed for simple and rapid installation. A wide variety of vinyl finishes as well as stainless and galvanized finishes are available. Norac products are certified by USCG/MED and ABS for shipboard construction and components of structural fire protection.

The Norac system is available in standard modules, semi modulated or fully modulated systems in steel or aluminum with sound reduction up to 48dB.

Maritime Services Corp. can provide full design and engineering for any size Norac project. This includes material takeoffs and joiner engineering.

Maritime Services provides the following Norac System products:

• B-0, B-15, A-60 Walls, Linings & Partitions
• B-0, B-15, A-30 Ceilings
• Inspection Hatches
• A-60 Floating Floors
• Toilet Modules/Wet Units
• Doors

Click here to view Norac Products.

PROMARINE PANELS
Promarine panels for bulkhead applications can be installed in any thickness to provide "C-class", non-combustible ship lining panels. Where "B15" walls are required, the panels should be a minimum of 19 mm thick - excluding laminate faces - and should be joined vertically.

Decorative inserts can be used to disguise the exposed steel pro-file and provide an aesthetically pleasing finished installation.

Bulkhead panels of 19 mm, bonded on both sides with approved HPL (high pressure laminate), have a total weight of 11kg /m2 making them much easier to handle and install (compared to all other available solid core wall panels where 17kg/m2 is typical for "B15" usage and + 20 kg/m2 for steel / mineral wool systems.

Maritime Services stocks several hundred Promat Panels as a part of Maritime Service's QUICK SHIP PROGRAM in a variety of USCG & MED approved plastic laminate finishes and as plain boards. Plain boards can be laminated with owner selected finishes and shipped within 2-3 weeks of order (ship time depends on availability of laminates). European and domestic (US) laminates are available to match existing decor.

Click here for a table of all Physical Properties.

ALUMINUM PRODUCTS
Aluminum sheet goods with decorative surfaces, one or both sides, are available with installation profiles for use where light weight is required. Panels can be provided perforated for use in areas where sound reduction is needed, such as engine rooms. Thickness of aluminum sheet and decorative surfaces can be varied to suit requirements. Thickness ranges from 0.50 to 2.0mm and weight will vary from 0.50lbs/ft2 (laminated) to 1.38 lbs/ft2 (laminated). Sheet size is normally 4' x 8' but is available up to 10' x 5'. Smaller and precut and punched and formed panels are also available.

Aluminum honeycomb and phenolic are very rigid panels with applications where lightweight and a variety of decorative surfaces are desired. Maritime Services can provide aluminum honeycomb and phenolic in a wide variety of thickness and alloys to meet mil spec and non-mil spec applications. Installation profiles are also available.

MARINE METAL FURNITURE
Maritime Services Corporation has over 25 years experience in providing quality furniture and furnishings that meet the stringent requirement specifications for the US Navy in new construction and ship repair for habitability and shipboard outfitting. Our latest line of Metal Furniture includes Lockers, Wardrobes, Beds & Berths, Desks, Stowage and Tables. Please download our sample catalog for more information.

Just a few of example furnishings are shown.

Available in steel, aluminum, powder coat or baked enamel, assembled or knocked down.